EcoWhite EPDM QuickSeam Accessories

The tested and proven highly reflective, energy-saving EcoWhite™ QuickSeam™ Flashing Accessories are in stock and ready to ship for your next EcoWhite roof installation. Firestone’s QuickSeam products have been hugely successful over the years due to their many benefits, including:

  • Easier and faster installation, which can significantly reduce labor costs.
  • Factory installed tape that yields higher quality seams.
  • Reduces VOCs on the jobsite
  • Proven and tested quality and reliability

These new accessories can be used with both 60-mil and the new 90-mil EcoWhite Platinum membranes. EcoWhite EPDM systems are eligible for a Red Shield™ Warranty up to 20 years. A leader in the industry, EcoWhite Platinum (90-mil) EPDM membranes, just like all Platinum EPDM membranes, qualify for a 30-year warranty.

EcoWhite EPDM 6″ QuickSeam Flashing

Firestone EcoWhite EPDM 6″ QuickSeam Flashing is a semi-cured EPDM flashing laminated to cured EcoWhite QuickSeam tape. EcoWhite EPDM QuickSeam Flashing is used to flash gravel stops and other details as specified in the Firestone Specifications and Details. It is available in 6″ wide by 100′ long rolls, packaged two rolls to a carton.

EcoWhite EPDM 12″ QuickSeam Flashing

EcoWhite EPDM 12″ QuickSeam Flashing consists of semi-cured Flashing factory laminated to cured EcoWhite QuickSeam Tape. It is designed to flash inside and outside corners, pipes, penetration pockets and other applications as required by Firestone Specifications and Details. It is available in 12″ wide by 50′ long rolls.

EcoWhite EPDM QuickSeam Pipe Flashing

EcoWhite EPDM QuickSeam Pipe Flashings are specifically designed to be used in roofing applications for flashing of round penetrations. EcoWhite EPDM QuickSeam Pipe Flashings will fit various penetrations and must be cut to correct pipe diameter before installation.

EcoWhite EPDM QuickSeam Splice Tape

EcoWhite EPDM QuickSeam Splice Tape is designed for field splicing of RubberGard EcoWhite EPDM membrane panels and flashing. It is available in 3″ and 6″ widths.

EcoWhite EPDM QuickSeam Joint Cover

EcoWhite EPDM QuickSeam Joint Cover is uncured Flashing laminated to EcoWhite QuickSeam Tape. A second 3″ diameter layer of uncured, flowing tape is applied at the center. The EcoWhite EPDM QuickSeam Joint Cover conforms to irregular surfaces such as encountered at “T” joints readily providing an excellent seal.

EcoWhite EPDM QuickSeam Joint Covers are designed to cover and seal:

  • T- joints formed by field seam intersections.
  • T- joints formed by the installation of pre-fabricated pipe flashings over field or factory seams
  • As a protection pad under sheet metal joints for EdgeGard or snap-on metal.

EcoWhite EPDM QuickSeam Corner Flashing

EcoWhite EPDM QuickSeam Corner Flashing consists of Firestone flashing factory laminated to EcoWhite QuickSeam Tape. It is 8.5″ in diameter and is designed to flash inside and outside corners in conjunction with EcoWhite EPDM Roof Systems.

EcoWhite QuickSeam Curb Flashing

EcoWhite QuickSeam Curb Flashing consists of 18″ wide, 60-mil, non-reinforced, EcoWhite membrane with 3″ wide tape factory laminated along one edge. The 3″ tape portion is used to splice the EcoWhite QuickSeam Curb Flashing to the roof membrane. The balance of the EcoWhite QuickSeam Curb Flashing is applied to the vertical surface with Single-Ply LVOC Bonding Adhesive, EPDM Bonding Adhesive BA-2004 (T) or Water-Based Bonding Adhesive S to adhere the membrane in place and terminated using an approved termination detail.

EcoWhite QuickSeam Penetration Pocket Kits

EcoWhite QuickSeam Penetration Pockets (6″ and 10″) are a labor saving option to fabricate penetration pockets. EcoWhite QuickSeam Penetration Pockets utilize EcoWhite QuickSeam Tape technology and injection molding technology, ensuring uniform product quality and consistency. Each EcoWhite QuickSeam Penetration Pocket has EcoWhite QuickSeam Tape factory applied for installation on RubberGard™ EcoWhite EPDM, UltraPly™ and ReflexEON™ TPO membranes.

EcoWhite EPDM QuickSeam SA Flashing

EcoWhite EPDM QuickSeam SA Flashing consists of 18″ wide EcoWhite EPDM membrane fully factory laminated to EcoWhite seam tape. It can be used to flash curbs and walls in conjunction with EcoWhite EPDM roofing systems where allowed by Firestone specifications.

EcoWhite& QuickSeam & tape is used as the tape adhesive to field splice EcoWhite EPDM QuickSeam SA Flashing to primed EcoWhite EPDM membrane, as well as the adhesive to bond EcoWhite EPDM QuickSeam SA Flashing to primed vertical substrates. The polymeric release liner (protects the tape until field application) is perforated 6″ from the tape selvage edge to delineate the lap portion of the EcoWhite EPDM QuickSeam SA Flashing. The perforated release liner allows removal of the liner in separate vertical and horizontal sections.

EcoWhite EPDM QuickSeam SA Patch for Conduit Flashing

EcoWhite EPDM QuickSeam SA Patch for Conduit Flashing consists of 18″ X 18″ EcoWhite EPDM membrane fully factory laminated to EcoWhite QuickSeam tape with a 3 ¼” diameter hole die-cut in the center. It can be used to flash the flange of QuickSeam Conduit Flashings in conjunction with EcoWhite EPDM roofing systems where allowed by Firestone specifications.

EcoWhite tape is used as the tape adhesive to field splice EcoWhite EPDM QuickSeam SA Patch for Conduit Flashing to primed flanges of QuickSeam Conduit flashings and EcoWhite EPDM membrane. The polymeric release liner (protects the tape until field application) is perforated to allow removal of the liner in separate sections.

 

Join Our Email List
Stay up-to-date on all things Firestone Building Products Canada.

Subscribe >
Find a Sales Rep

Click below to find Firestone Building Product Sales Reps in Canada.

Find >
Find A Contractor

Please select your province to find the Contractor in your area.

Find >